Why SE-77 Square Edge Jig?
- Make your plane irons and chisels sharper than when they were new.
- Easy to set up and use.
- Micro adjust screws to compensate for tiny deviations in tool design.
- Possibility of rounding off the corners of your edge slightly to prevent scratches in the timber you’re planing.
- Works with both Tormek T-4 and Tormek T-8, as well as older models.
Mounts firmly and sharpens safely
The tool is aligned in the jig along the flat top surface of the tool. The SE-77 Square Edge Jig has a flat shoulder that makes it easy to mount the tool correctly at an angle of 90°. The pressure from the center of the plate is distributed to the edges, positioning the tool firmly in the jig without having to force it to stay in place. Then you just have to check the sharpening angle and set the jig at the right height on the universal support, and away you go!
Micro adjust screws for maximum precision
The SE-77 Square Edge Jig has been fitted with a movable end that can be adjusted using two small adjustment screws, which allows for fine tuning the settings if necessary. This might be required if the tool is very narrow or not exactly parallel to the grinding wheel, or if the blade is slightly twisted. Fine tuning the settings is done in seconds by releasing one of the adjustment screws and tightening the other.